It’s the stick that started it all. The Easton Synergy revolutionized the game both on and off the ice when it was first introduced and now the legendary name is coming back as Easton is prepared to launch the new Synergy HTX line this summer.
Last seen in the form of the ST 16, the Synergy returns to the ice with new technology designed to create a more responsive blade that creates more velocity off the toe. Easton refers to this technology as Hypertuned and Hypertoe.
The Hypertuned technology sees Easton specifically match stiffer blades to stiffer stick flexes to ensure that the blade responds properly to the type of player that uses each flex. For a player that prefers a stiff stick, the blade’s stiffness will match giving that player a stick with a uniform feel from the flex down to the blade. The same goes for softer flex sticks being paired with softer blades. This differs greatly from sticks of the past which uses a uniform blade construction that offered a different response with each type of flex profile.
In addition, the blade itself has gone under a makeover as Easton’s Hypertoe technology introduces a tapered ribbing to the blade that’s designed to add velocity as the puck comes off on a pass or shot. The blades are easier to load up thanks to the dual lies that Easton utilizes, making the new Hypertoe a benefit to anyone using the stick.
The ultimate goal with the Hypertoe isn’t just to add velocity but to make it easier to load the blade to shoot in a combination that serves to increase your shot without any additional effort. It’s a trait that’s been introduced on a few of Easton’s recent products but it should add even more on the HTX as the Hypertune technology ensures a more uniform feel throughout.
The HTX has been popping up here and there around the NHL this season and will officially be on the shelves in June.
What would happen if your lace snaps two minutes before warm up? What if your ear loop rips or a helmet buckle pops off? What if you need to re-work an edge on your skate or tighten up part of your helmet? Do you have the tools to address any of those issues or any others that crop up through the course of a hockey season?
If you answered no to any of those questions you should consider putting together an equipment first-aid kit and store it in your bag at all times.
In addition to a screwdriver (both a Phillips and a small flat-head) I also keep extra laces, helmet hardware and skate sharpening tool in my bag at all times. That way, if there are any unforeseen issues in the locker room, I’m not stuck with a faulty piece of equipment – or something that would prevent me from playing – for the game I’m preparing for.
Having some sort of emergency gear kit is particularly helpful if you’re on the road at a tournament or somewhere that may not have the comforts of you home rink. This is particularly important if a fully stocked pro shop isn’t at your disposal. Exactly what you deem to be important to have in your bag at all times comes down to your own personal discretion, but there are certainly some key items that no hockey coach or player should be without when you find yourself in a pinch.
Standard Phillips or flat-head screw driver: A vast majority of the hardware on your helmet or gear will require a Phillips screwdriver, but it doesn’t hurt to have one of each in the event that a flat-head is needed. This should be considered a must have for any bag.
Scissors: Again, an item that you won’t want to be in the event that you run into any sort of scenario where a quick fix is necessary. You don’t need to have this on you at all times, but it wouldn’t hurt either.
Allen wrench: This is getting a bit more technical, but it you happen to keep an Allen (or hex) wrench can help in the event that you need to tighten up something on your skates. This may be best used at home, but you may find it necessary in an emergency.
Extra laces: Whether you’re a waxed or non-waxed guy, don’t get caught with a ripped lace and nothing to replace it with. That’s the last situation you want to be in. An extra pair of laces aren’t going to take up much space and will turn out to be a life saver when you find out you need them.
Helmet hardware: Just like with stocking a stone or Sweet Stick in your bag, having some sort of helmet hardware will save you in a pinch. This can be as simple as a few extra screws for your cage right up to a full Helmet Repair Kit with additional buckles and straps if you really want to go big.
Extra mouth guard: For those of you who are required to wear a mouth guard in your leagues, keep an extra one in your bag. This way, if you happen to drop yours at home, you have a back up handy.
Another key is having something to keep all of this in. Get a small shaving kit or toiletry bag and stash your backup gear and hardware in there. That way all of these small, loose items don’t get mixed in with your bag. If you have extra pockets on your bag, those work as a great place for them as well.
I use an outer pocket on my bag to hold my Sweet Stick, screwdriver, tape, extra laces, extra suspender straps (for my goalie pants) and additional helmet hardware. It never gets mixed in with my gear so it isn’t in the way and can’t get lost.
Keep some of these ideas in mind and the next time you or a teammate are in need remember that a simple equipment first aid kit would solve all of your problems.
Our second installment of On the Ice comes in a different gear category than the initial review of the Warrior Dynasty stick. I’ve been able to try out a pair of Easton’s newest skate, the Mako.
The Mako is a new release from Easton and actually is a standalone product compared to the Stealth skate line which offers a number of different models to select. The focus of this skate is all about speed. From the heat moldable composite upper, the new CXN holder, aggressive pitch angle and the new Extendon feature, the Mako is designed for the sole purpose of speed.
With a composite construction the Mako skate is incredibly light and that feature is something that is noticeable from the first time you take it off the wall. However, the boot design offers more than just weight reduction. Easton’s asymmetrical design is focused to increase side-to-side agility for the player. In addition, the aggressively angle of the boot and holder offer a forward pitch that is not only conducive for straight ahead speed but also cornering and agility.
These features help to promote Easton’s new “Art of Speed” slogan. However, they aren’t just window dressings. The aggressive forward pitch and lightweight construction are complimented by the Extendon guard; built to promote the natural stride of a hockey player. The Extendon is a new take on the typical tendon guard on a normal pair of skates – and it does take a little getting used to. The slightly longer guard is designed to not only promote full extension in loading your stride but also immediate recovery after pushing off. It almost serves like a rubberband in a sense; aiding the skater in each and every stride.
The general look of the skate is somewhat odd, especially if you’re someone who is used to a traditional skate with a black boot and white holder. However, the sharp orange accents the compliment the black and silver on the boot looks pretty great. In fact, for as funky of a design this skate has, it passes the mirror test with flying colors.
It’s also appealing to more and more NHL professionals. Easton athletes like Derek Roy were wearing the Mako throughout this season and it was gaining a strong foothold (no pun intended) with the professional crowd. For a regular guy like myself, if was thoroughly impressed with the skate.
Out of the Box
If there is one thing that needs to be impressed upon anyone considering this skate it is that you cannot judge the fit before you bake it. Not only is the entire boot thermally formed but the tongue is as well. When you first put the skate on it is stiff, narrow and rather unforgiving. In fact, it is incredibly difficult to lace prior to being baked. However, once these are baked they are an entirely different skate. Your foot will slide into the boot like butter and once you’re laced up the skate actually wraps itself around your foot.
The reason I feel it is so important to impress this upon you is because this skate is designed to be fully customized to the wearer’s foot. While other skate models feel better once they’ve been baked, the Mako has to be baked. The result ends up being a ridiculously comfortable skate that is formed around your entire foot.
The Extendon feels a little different when you first get the skates on and it is because it sits a little closer to your leg (as it is designed to move back and forth with your stride) which creates an unusual sensation when you first lace up the skates. However the adjustment period for that is short as there is no discomfort created by the feature.
Another thing that threw me off was the tongue. It is fully heat formed and has a thick plastic insert on the top. Before baking it is somewhat cumbersome and difficult to deal with. Once you’ve baked the skates it is pliable and ends up contouring around the top of your foot and up through the ankle. Like with the initially stiff boot, the tongue is a completely different piece of the puzzle after the skates spend some time in the oven.
On the Ice
While I needed to wait a couple of weeks to get these on the ice, I didn’t have a ton of time to break them in at home. Aside from lacing them up a couple of times while watching TV, the skates didn’t get too much time to be broken in prior to their first ice time. This was a major concern for me at my first game in them.
Yet, after my first game I felt no ill effects. I didn’t have any blisters, my feet weren’t sore and I was amazed that after baking the skate and sporting it for a couple of hours at home that these were game ready. While your experience may differ a bit, I’ve found that most who are using the Mako determined they are all but game ready after getting baked and forming to your feet.
I have to say this was a major relief to me after watching my college teammates suffer through breaking in skates year after year.
The biggest adjustment for me on the ice was the forward pitch of these skates. Coming from CCM Pro Tacks, I was used to a flatter attack angle and a wider boot. The Mako has a much more pronounced forward pitch in addition to a more narrow fit. While the fit itself never became an issue, I found myself a little wobbly when I took my first few spins around on the skates. In fact, I had one moment early in the game in which I took twice the amount of time to turnaround than I usually would because I was still unsure on my feet.
What does all of that mean? Are these that difficult to get used to? The answer is no. By the midpoint of the first period I had fully settled into the skates and I can now say after a few ice times that these are a truly incredible product.
I am by no means a fast skater. In fact I’d contend that while technically sound I am actually brutally slow. Yet I’ve noticed my strides have been more powerful lately and my straight line speed has actually increased. The reason I can say that this is so noticeable is the way the skate feels if you take hard, aggressive strides. The construction of the boot and holder are so conducive to complimenting the motion of skating that you do feel the skate reacting with you as you go up and down the ice.
Easton hit it out of the park with the Mako skate. It is a highly evolved product that gives you noticeable results when you wear them. So long as you understand the difference in fit between the skate out of the box and the skate out of the oven, I’m confident that this would be on top of everyone’s shopping list when they’re looking for new skates.
Great Skate: Easton has always managed to raise the bar with each stick they release. What about the new stick line, that you can share, will raise the bar again?
Mike Mountain: The VSeries is really a product of a couple years working with premier shooting instructors and getting a better understanding of shooting mechanics. We wanted to understand what makes the best goal scorers and then build a product that works with that technique better than anything out there. We learned that the best players are loading the blade and shooting the puck off the toe. Our engineers then created the patent pending Hypertoe construction. It is a series of tapered ribs in the toe of the blade to create additional stiffness and response.
GS: The Art of Speed is the tagline Easton has been using on the new gear coming out, including the new Mako Skates. Is it safe to say the new stick line will build on the Art of Speed legacy?
MM: Speed is at the core of everything we do. In sticks we are focused on velocity. How you achieve it is to create load and release in both the shaft and blade. Everything that went into the line from patterns and flex’s to coatings and stick lengths are done to create load and release for a maximum velocity.
GS: Is it correct that the V9E will be the flagship of the new stick line or will there be another model to accompany it?
MM: The V9E and V9 will headline the VSeries. Both sticks will have the Hypertoe construction in the blade while the V9E will have the elliptical profile and the V9 will have a tapered profile.
GS: It has been cool to see various NHLers using prototype sticks this season without any logos. What can we expect with the V9E color and logo scheme?
MM: You will see those same players transition to the new look in the first round of the playoffs. We wanted them to truly feel the difference of the new construction and not be swayed by graphics. The response we got was great in terms of a noticeable performance advantage.
GS: Will the VSeries carry the matte look that the Stealth line has popularized?
MM: They will, we have also added a textured shaft coating that goes along with it.
GS: In addition to the elliptical profile on the V9E will there also be a model with a traditional taper too?
MM: The VSeries will include a V9E, V5E and V1E with an elliptical profile as well as a V9, V7 and V3 with a tapered profile.
GS: What’s your favorite feature or addition about the new line?
MM: We have added a new pattern to our line, the E36. It is a lie 5 mid curve with a dual lie and slightly open face. Like the E28, this pattern forces your hands in the correct position in front of the puck while positioning the heel slightly off the ice in order to load the blade. The junior version has been engineered specifically for younger players with the curve slightly towards the toe to provide better control. So far the reception to this pattern has been phenomenal with players.
Manufacturers bring top-end sticks to childhood favorite
Knee hockey is one of the numerous things that makes hockey what it is. Not many sports have a portable, miniature version that can be played just about anywhere.
Just think back to travel tournaments and the countless hotel hallways you were expelled from when playing knee hockey. Knee hockey just happens to be a portion of hockey culture that makes our sport so incredibly unique.
Not unlike the full size version of the sport, knee hockey has seen a number of advances in recent years. Manufacturers now make miniature nets (not necessarily a new development) which inevitably saves desks, tables, chairs and hallway radiators from the beating that comes along with the game. In addition, the days of dipping your straight-blade plastic stick in boiling water to create a curve are over. Now you can choose a mini stick from a plethora of choices that are near mirror images to the full size sticks made by hockey’s biggest manufacturers.
Warrior, Bauer, CCM, Reebok and Sher-Wood all have created their own composite mini sticks complete with curves and identical design patterns to that of the full size retail sticks you use on the ice. What these sticks do is add a little style and extra performance to a rec-room or travel tournament classic.
Reebok not only has a mini composite version of their new 20K stick, they also introduced a composite goal stick that is patterned after the 11K composite goal stick that is being used throughout the NHL – this follows previous miniature versions of the O-Stick and A.I.9. CCM also produced a mini composite of their premier stick with a mini RBZ. Like the 20K, the mini RBZ also sports the same markings and art that the top model does – although it doesn’t provide some of the technological advances that the full size stick does.
Both CCM and Reebok have their own net models as well which can be set up in your basement or rec room to add even more of an ice element to each knee game.
Bauer actually has a Vapor APX and TotalOne NXG for you to choose from while Sher-Wood’s collection spans the entire NHL. So, for those of you who are nostalgic for the straight plastic, team-branded sticks of the past, perhaps the Sher-Wood team models would provide a nice transition.
While I can’t attest if the composite mini sticks can add performance to your knee hockey game as their full-size cousins do for ice hockey, I can say they bring a cool wrinkle to a game that you should never need an excuse to play.
I, for one, am seriously considering setting up a knee hockey rink as part of my man cave in the very near future.
Easton Mako protective line reinforces Easton as a trendsetter
Easton entered 2013 fresh off a year in which the Stealth RS and Mako sticks made a big splash on the hockey world.
In terms of aesthetics alone, the Mako and Stealth’s clean look were monster hits with hockey players everywhere. The weight and performance of each stick brought them to the top of the heap when comparing the products that hit the market in 2012.
Easton’s prowess in stick making is well documented, going all the way back to the Synergy. In addition previous skate and glove lines have maintained impressive staying power in the hockey world. This year, the foremost leader in stick technology has taken a new and aggressive approach with their protetive equipment.
Brand new lines that bear the Stealth and Mako names are to be released and they both bring a new wrinkle to what options players have to wear underneath their uniform.
Both the Stealth and Mako lines feature a design rooted in maintaining a full range of motion for the wearer. The shoulder pads in particular focus on this with Easton’s Segmented FRM. However, that is where most of the comparisons will end.
While the elbow pads and pants for both lines share nearly identical traits, the shoulder pads and shin guards differ in many ways. The true variance is with the Mako line which has brought forth a number of new features and benefits as the Stealth protective gear is far more traditional in terms of features and design.
The new Mako shoulder pads is designed to provide an equally protective pad while utilizing lightweight and free moving design. This is accomplished with the new Conic Body Fit design feature which uses an asymmetric, cross-body closure and corresponding straps that adjust the entire unit.
The Conic Body Fit allows for almost an unobstructed range of motion for the player with a design that hinges around your back as opposed to over your shoulders. In addition to hinging in the back, the unit is built more like a shirt and less like a shawl (for lack of a better term). These two features minimizes the typical restrictions in twisting and rotating that a traditional shoulder pad – one that drapes you’re your shoulders – would have.
By providing a shoulder pad that fits and reacts in unison with your body, Easton is improving upon a method of maximizing protection (which this unit does) without limiting mobility.
The same type of features are found in the new Mako shin pad. Easton spent a great deal of time redeveloping the knee system in the pad in order to focus the center of gravity on that location while improving on the anatomical support.
In the same way that the Conic Body Fit system is designed to react to your upper body’s natural movement, the new anatomic knee on the shin guard is designed to move in unison with the natural bend of your knee.
Easton’s three-piece design incorporates a stiff, thick primary shin guard that covers an injected calf wrap which provides flexible wrap-around protection for the wearer.
What is particularly impressive about the Mako line is that a majority of the design features can be found with every model. This is not a protective line that leaves out features as you hit certain price points. While weight and performance will be limited when comparing the M3 to the Mako, the Conic Body Fit and other features aren’t ignored.
This – along with the Stealth – is an impressive line that shouldn’t be ignored the next time you’re at Great Skate shopping for protective equipment.
Easton Mako II Composite Hockey Stick – QUICK HANDS EQUALS SPEED
The Mako 2 replaces the original Mako starting off with the shaft that is lighter than the original Easton Mako, and it’s slightly concave with texture using uni-directional fibers which make it stronger and lighter. The Blade has been lightened as well, and the ribs are actually shifted a bit upward increasing the area where puck meets blade.
Having said this when we tried out the new Easton Mako II the puck come off the blade really hot, makes for a better and a softer feel of the puck. Not only did Easton get this stick right but it has great color features by going back to the original black blade and keeping with tradition with the white shaft. If you would like to test this stick out and find out for yourself the difference please stop by our retail location and test the new Easton Mako II out in out shooting room. If you need help finding the right stick for yourself and can’t make it in please call us at 1-800-828-7496 or email us at firstname.lastname@example.org