More and more attention and focus in equipment design is being devoted to protecting against rotational impact from hits and collisions. The CCM Resistance helmet has been constructed to add protection against linear and rotational impacts.
CCM has made a few aesthetic changes to the Vector shell that became so wildly popular across the NHL over the past number of years along with adding vital pieces of protection to the liner. These changes and alterations were driven by the desire of CCM to create one of the most protective hockey helmets on the market.
Teaming up with the University of Ottawa, CCM made sure the new features and technology protected the most vital areas of a player’s head by placing the addition padding in strategic locations around the shell and liner.
The R.E.D. System is what sets the Resistance apart from the other helmets that CCM has released in recent years as in brings a whole new level of protection into play. In addition to the traditional foam liner you can find in any high-end helmet, CCM has added two new layers of protection that are specifically combined to reduce rotational impact.
The R.E.D. system combines a series of liquid filled bladders with EEP molded shock absorbers called Impact Pods that aid in reducing linear impacts. Both work in a similar method of absorbing the impact and motion of a player’s head when taking impact during a game. The R.E.D. liquid bladders work to slow any rotation of the head while the Impact Pods expand and retract with direct collisions.
The Resistance joins Bauer’s RE-AKT helmet as two of the most protective helmets that specifically target rotational and linear impacts with specific targeted areas for increased protection.
Bauer reigns supreme at the Stanley Cup Final as the equipment giant can claim it is getting the most usage in each major gear category at the Final.
The only close category is sticks, which is the only category in which Bauer doesn’t hold over 50% of the usage. Their 42% share still towers over the next closest manufacturer (Easton) who slots in at 17%. It shouldn’t be too surprising to see the stick category as the most diverse in terms of usage as every manufacturer offers a number of similar, elite products. In fact, Bauer’s dominance in the category is based on their three different lines as opposed to one singular product as is seen by the overwhelming number of players wearing Vapor skates.
One other category that isn’t illustrated above is goaltender equipment. With David LeNeveu currently serving as the Ragners’ backup, there is a 50-50 split between Vaughn and Bauer users. If and when Cam Talbot returns, Vaughn will hold the majority (Quick and Jones) with Bauer and Reebok each having one goaltender wearing their equipment.
To further break down the goaltending category, Lundqvist and Talbot each wear Bauer helmets, Jones wears Pro’s Choice and Quick uses Sportmask.
These are always fun graphics to look at just to see the vast diversity of equipment used by each player. Try to figure out who is wearing what over the rest of the series so you can line up individuals with the graphic above.
The info on Bauer’s follow up to their incredibly popular APX protective line is out as the APX2 protective equipment will be in stores this spring.
Bauer’s tapered fit line has added a pair of fascinating features across the board – not just to the pro models – that are designed to reduce weight and increase the performance of each piece of the line. The APX 2 shoulder pads, elbow pads and shin guards all still feature Free Flex sections that target key areas that require additional flexibility and range of motion. For example, the Free Flex knee cap and liner extension at the bottom of the APX 2 shin pad provides an added range of motion in the knee and at the ankle for a more comfortable, natural skating stride.
Similar areas on the shoulder and elbow pads utilize a similar strategy while the APX 2 pants have specific panels with special stretch fabrics designed to lighten and increase the player’s range of motion.
Where things get interesting are inside the gear itself. In a way, it appears that Bauer is starting to pull some of the traits that made the OD1N line so groundbreaking in terms of weight. Overall, Bauer has worked to shed over 25% of the weight from their previous line. That savings, calculated over the course of an entire game equates to massive savings for the player. Think of it as lifting a total of 1000 pounds in 60 minutes of play and then taking 250 pounds off that total thanks to your equipment.
One way Bauer has done this is with Aerolite foam. Bauer has developed a new way to layer the foam in areas like the shoulder cap, chest and back panels on the shoulder pads in a way that not only increases overall protection but also limiting the total weight of the pads themselves. The APX 2 shoulder pads see the most extensive use of the Aerolite padding due to their general construction, but this is something see in vital areas on the shin and elbow guards.
Where the entire line benefits is the new 37.5 liner. This is a space age technology that wicks moisture but then uses body heat to evaporate the moisture away. The name is derived from the ideal humidity level and temperature for the body (37.5 degrees celsius).
The trick behind 37.5 is to not only pull moisture away from a player’s skin and out of their equipment, but to use the body heat generated in the game to evaporate that moisture. Therefore, the harder you skate and the more you sweat, the better that 37.5 liner works. When working at its peak, 37.5 works five times better than traditional performance liners and material.
Bauer’s APX 2 line isn’t their only product that utilized 37.5. It can also be found in Bauer base layer apparel as well.
Bauer’s APX line has been adopted by countless professionals and elite players around the world since its first introduction. Bauer responded to the popularity by taking feedback on the equipment, retooling certain aspects and releasing new and improved versions under the name APX2 in 2014.
Among the pieces of equipment that has undergone change is the APX2 glove. The APX2 still features the tapered fit and slots in alongside the anatomically designed Supreme and traditionally designed Nexus equipment lines. The APX2 features a streamlined new look and colorway breakdown compared to last year’s model. It also features a number of technical advances that shouldn’t be ignored.
Bauer managed to shed upward of 30% of the weight off the APX2 to make it that much lighter than it’s predecessor and direct competitors. Additionally, Bauer has introduced the Quattro+ Palm system that’s designed to help wick moisture away. The new palms are full of tech and also feature matching team colors to a number of the gloves. This is an interesting choice given the widespread popularity of the typical beige color seen on most gloves. When I think of colored palms, Claude Giroux immediately springs to mind from late last season when he was trying out orange palmed gloves. I thought he looked silly and the concept definitely has the ability to look odd, especially if the palm sharply contrasts the glove itself.
Bauer also added Proron XRD foam to the back of the hand to increase protection from pucks and sticks. It’s an addition that brings Bauer’s favorite new feature into their glove line. It seems like a wise choice considering adding the material to their helmets and other protective lines has been nothing but a boon for the company.
The Bauer APX2 gloves will be on the shelves soon and will make for a great addition to your bag heading into next season.
There are 60 teams across the three leagues that make up the CHL. There are 16 more teams that make up the USHL and between the two leagues, they span across Canada and into 13 American states. Depending on where you live, you’re probably a lot closer to a major junior team than you think.
From Great Skate’s driveway you could make it to St. Catharines to see the Ice Dogs in 30 minutes or less. The Erie Otters are just about 90 minutes door-to-door while many of the OHL’s other clubs aren’t much further away.
I was able to make three separate road trips to see junior hockey played this season, making two trips to Erie and another to St. Catharines.
The trip to see the Ice Dogs was particularly interesting as Niagara was playing their final season at Jack Gatecliff arena, which was originally built in 1938. The Ice Dogs will be moving to a new, state-of-the-art arena for the 2014-15 season and having the opportunity to see one of junior hockey’s last great barns was a special treat.
The intrigue of seeing a game played at the junior level is multifaceted. Young players, competing not only for their team’s success but their own futures adds to the narrative on a nightly basis. Each team has at least one established draft prospect who is often playing at another level as compared to his teammates and opponents. The fans a passionate and informed and the atmosphere is different than many professional games you may have seen.
Jack Gatecliff Arena has a small ice surface with no more than 10 rows of seating in the stands. Standing room fans pack in the tiny concourses and the low rafters and press box overhangs add to the intimate atmosphere. Only a handful of these smaller, “old school” buildings are left as more and more teams are moving into shiny, modern buildings with better amenities and a more professional set up.
If you’re looking to track down some of the older, more intimate arenas that are left, Stadium Journey has documented the homes of all 20 teams with full reviews of each building.
The trip to St. Catharines was mainly motivated by the chance to see hockey in a building that had maintained for so long. It was also motivated by the fact that the Ice Dogs are the closest franchise to Buffalo and if there was any team I’d latch onto each season, their proximity would play a major role.
My two trips to Erie were similarly motivated (proximity) but the Otters boast another highly marketable feature in the form of a 17 year-old phenom named Connor McDavid.
As many hockey fans are already aware, McDavid is expected to be the crown jewel of next year’s NHL Entry Draft and he’s already dazzled in his first two years of junior hockey. Seats are increasingly hard to come by in Erie as the local fanbase is augmented by visitors from cities like Buffalo, Pittsburgh, Cleveland and more coming to see McDavid play. He’s worth the price of admission.
My first jaunt to the Erie Insurance Arena resulted in having to buy standing room only tickets for $17 each. The arena’s procedure for standing room landed us about seven rows behind the bench on the blueline, not a bad deal.
Instead of missing out on a seat the second time down, our group used the box office to buy tickets ahead of time in the section of our choice. We pad $16 to sit on the glass. Even without McDavid, the level of play far surpasses the price to get in the door at any arena, let along Erie.
What’s even better is that these trips are a piece of cake to plan. Many teams run cool promotional giveaways – we happened to be too late for the McDavid player posters they were giving away – and the tickets aren’t hard to come by if you buy them ahead of time. Another fun fact regarding those promotions, the player or players featured often sign autographs after the game to add to the unique souvenir.
You’re not going to be disappointed with your choice of a junior hockey road trip. The atmosphere is different than that of an NHL game, there’s rarely a bad seat in the house as the arenas are all right-sized for the crowd and the level of play is high. Maybe put together one or two for next season and grow from there.
Taking over the Supreme banner from the NXG skate, the new MX3 adds features that were originally unveiled with the APX2 line last year while also providing updates exclusive to the new line.
The MX3 features the TUUK Lightspeed Edge holder that features the trigger blade replacement system that came out on the APX2. Additionally, the MX3 also features Bauer’s revolutionary injected stability lace system. This is the square eyelet system that Bauer has developed to reduce or eliminate lace bite, allow the laces to glide through flat as opposed to twisting or catching and, finally, also providing for a better fit and forward flex for the skater. The square eyelets also remove the pesky round, metal eyelets of yesterday that could so easily rip out after excessive use.
Implementing the one-piece eyelet system was a no brainer for Bauer as they’ve taken such a committed approach to the anatomic design for the Supreme line. Further advances to the Curv composite upper design allows for the MX3 to provide a full 360-degree fit after the skate has been properly baked. This ensures a custom fit that’s an anatomically correct as possible.
Additional changes to the interior of the skate include a supple update to the HydraMax liner that’s already been a fan favorite from previous Supreme models.
Bauer has also developed a revolutionary new tongue system that allows a player to completely customize the shape and performance of their skate’s tongue. The 3Flex Tongue features Curv composite inserts that vary in stiffness depending on the type of flex you prefer. Much like a composite stick, the flex options are designed to act like a springboard as the player flexes forward and pushes off with each stride. Ultimately the goal is to provide a fully custom feel that allows the skate to spring backward as each stride is taken.
Another interesting feature is the features included in some of the lower models of the Supreme line. While only the MX3 offers the 3Flex tongue, HyrdaMax 2 liner and the Lightspeed Edge holder an number of features can be found on the 190, 180, 170 and 160. All four are capable of being fully baked, they each feature the Lightspeed Edge holder while the 190 and 180 also feature the Curv composite upper.
Overall the changes to the Supreme line are relatively minor compared to previous years. But the updates that were made provide an impressive upgrade to an already impressive line.
A perfectly painted goal mask is the single coolest source of expression in hockey. A painted mask can showcase team pride or provide personal insights. There are a host of mask painters around the world who span from do-it-yourself painters right up to world-renowned artists who are on the speed dial for multiple NHL goalies.
However, getting a mask painted isn’t as simple as the one or two-week turnaround that NHL goaltenders enjoy when they change teams or create new mask art. It is a somewhat lengthy process that should be properly researched before steps are taken to put paint to helmet.
First off, many masks are difficult to paint while others simply shouldn’t be painted at all. Most high-impact plastic molded masks aren’t properly rated to receive paint and even if you’re able to put paint on the mask, any warranties and certifications that accompany the mask will likely be voided.
Most manufacturers higher level masks are designed to take paint and maintain their structural integrity after. Proper research to determine which masks can and cannot take paint should be done prior to making any final decisions. In addition, many companies require painters to be properly certified to paint particular masks. For example, there are specific Bauer-approved painters who have the proper certifications or approvals to paint those masks. These certifications indicate that the artist knows how to properly prepare and paint the mask so the structural integrity isn’t compromised by the process.
If you have any concerns about the quality of the mask you’re thinking about painting or you’re unsure that the painter you were planning on using is properly certified to do the work, there are other avenues to take.
Most companies are now releasing masks with decorative decals already applied so the masks have some color to them right out of the box. Many of Bauer’s junior models feature these decal sets. There is also the option of finding a custom decal shop that could potentially create a high durability decal or sticker set for a helmet that would still have custom artwork but wouldn’t compromise the helmet itself.
This isn’t all doom and gloom, either. Going the decal route is probably the safest route to take in terms of adding custom decoration to a mask. However, if you know that your mask can take paint and you’ve found an artist to do the work, go nuts! Getting my mask painted in college was a very fun experience. It took a couple weeks for the work to be done and I couldn’t have been happier with the results.
My advice for anyone who is going to take this step is to stay involved with the artist. Even if you only have a general idea that you want to let them run with, be clear with what you’re looking for. This ensures you will be happy with the final product for years to come.
Just over seven days separate 30 general managers from the feeding frenzy that is the NHL trade deadline. Of course, recent years have resembled a salad bar more so than an all-you-can-eat buffet. While the blockbusters that fans and media love have become rare, the action at the deadline will still be there.
There are already a host of names floating around the rumor wires as real and make believe insiders and sources report on the whispers they hear about the players who will end up being moved in the coming days. Marquee names like Ryan Miller and Ryan Callahan are making the rounds with fans of contending teams are waiting to see what their GM can poach from the annual swap meet.
The 2014 deadline ought to provide a few fireworks specifically because of teams like the Sabres, Islanders and Oilers. All three are sliding towards the draft lottery in hopes that they win the right to pick first overall and each will likely unload some stars prior to the deadline.
Based on many reports, Edmonton appeared to be very close to dealing Sam Gagner to Los Angeles prior to the Olympic break and Gagner is still said to be on the block along with Ryan Smyth and Ales Hemsky. The Oilers could certainly market a few of their other young stars in hopes of shoring up their blueline, but their five-year rebuild will likely continue into yet another draft lottery where their number of top-3 selections will grow to four after winning the draft lottery three years in a row (2009-2012).
Losing John Tavares will likely ensure that the Islanders begin playing for 2015 as they’ll try to get a king’s ransom for Thomas Vanek and Andrew MacDonald as the two pending free agents will attract plenty of attention from teams battling for playoff positioning. Moving the two may also allow Garth Snow to protect his 2015 first round pick as Vanek and MacDonald could potentially net a first round pick each, giving Snow a security blanket, of sorts, for this year when he may need to give up his potential lottery pick to the Sabres as part of the Vanek/Moulson deal.
Buffalo is expected to be very busy as Miller, Moulson and Steve Ott are all expected to be moved and each has their own market value as the deadline approaches. A few teams are said to be interested in Miller, although the number who will likely make a legitimate offer won’t likely eclipse five. My gut tells me he ends up in Washington where George McPhee is on the hot seat and his team’s goaltending has kept them from playoff contention this year.
Ott and Moulson are said to have many more suitors and exactly where they end up is anyone’s guess. I wouldn’t be overly surprised to see Moulson end up in Ottawa where Tim Murray not only knows the prospect pool that he’d be gaining talent from, but his time with the organization may make negotiations go a bit quicker. Ott’s landing spot could be quite literally anywhere as his game can adapt to a number of different styles and any contender would be interested in adding an energy player like him. My money would be on a Western team, but that’s about as far as I would go in terms of guessing his destination.
It’s also rumored that Ryan Callahan will likely be skating in a new city after the deadline and he’d also add the two way element that so many teams find valuable. While trading Callahan may be expected, I’m fully expecting to see at least one big trade that catches everyone off guard. It could be something similar to the Marian Gaborik trade last year that saw a host of players swapped between New York and Columbus. Regardless of who is moved, count on at least one of those to catch you off guard before the day is out on the 5th. Also keep an eye on the trade wire in the days leading up to the deadline as a few moves could easily come prior to next Wednesday.
As hockey equipment has evolved, the ability for players to swap out gear for special events has been a growing trend. Goaltenders are the easiest to pick out as they sport different helmets and pads for events like the Winter Classic each season.
The Olympics are not immune to this change as skaters need to switch over to gloves and pants that align with their country’s colors and some goaltenders choose to wear new equipment as well to match their nation’s colors.
It will be pretty easy to notice which goaltenders have made changes as their new gear will certainly stand out as opposed to what they wear on a nightly basis in the NHL. Most players will likely wear a shell over their team-issued pants to remain as comfortable as possible and skaters have likely had a chance to break in their Olympic gloves for at least a week.
There will be some other changes that may or may not stand out to fans as they’re watching the games aside from the simple color change that a player’s gear will undergo. Like the NHL, the IIHF has specific equipment standards and those standards must be followed by all players.
In the crease, some equipment manufacturers choose not to pay the fee to the IIHF so their company logos can be shown during play. Vaughn is a company that has long been logo-less in international play and that trend will likely continue this year as Tuukka Rask and Jimmy Howard are both heading to Sochi without the Vaughn branding on their equipment.
Ryan Miller’s gear was changed over to red, white and blue using a special aftermarket product that will keep him from breaking in new equipment for the short tournament. As you’ll notice, Miller’s pads (and gloves) still have the Vaughn logos showing but he’ll likely need to have those covered up.
As the games continue small things like that will probably become more obvious and one feature of the 2010 games in Vancouver seems to have carried over to Sochi. Forwards, who will have small Sochi logos on the front and back of their helmets, will have an interesting change made to their gloves.
An interesting rule was created heading into the 2010 Olympics which limited the size of manufacturer logos on the cuff of player gloves. This meant that the size of the font needed to be reduced from the relatively large font found on the ice in NHL games and on the shelves in stores.
One other big change will be the handful of players using Bauer’s OD1N equipment. Patrick Kane, Jonathan Towes, Alexander Ovechkin, Nicklas Backstrom and Henrik Lundqvist were all tabbed to test the revolutionary gear that Bauer is comparing to a concept care. The player skates will stand out most as their peculiar design is like nothing that’s ever been worn before.
The OD1N line is designed to save massive amounts of weight that will ultimately give players more boost and stamina on a game-to-game basis. While it’s unexpected to be seen in stores anytime soon, keep an eye on those players to see if their game receives a noticeable boost.
If you notice any other distinct differences in something a player is wearing, leave a comment here or on the Great Skate Facebook page. It’s interesting to see some of the new and exciting products that companies will release around this time.
Not that long ago Bauer introduced the Vapor XXX composite goal stick to the market and forever changed the landscape of that particular niche of goaltending equipment.
While a few other entries served as a precursor to the Vapor, there wasn’t much out there in terms of a non-wood goal stick to purchase and use for goalies of any age. Today the goalie stick market is nearly flipped 180 degrees.
Each and every equipment manufacturer in the stick business has at least one line of full composite sticks to complement their traditional wood models. Some companies offer a number of lines that actually outnumber the traditionally built models they offer (Bauer).
When it comes to goal stick shopping, a few things need to be considered. The most important of which is durability and price point. While no two sticks are built the same, knowing that the one that works best for you is going to last longer than a few practices is vitally important.
Other factors that come into play are balance, weight, pattern and feel. With a plethora of composite sticks to consider when sorting through the stick rack, those factors become that much more important.
In my time playing net I’ve used a composite only a handful of times. Not once did I feel that I enjoyed the experience. Short of using the highest price point models, I found that the sticks I tried out were no lighter than the wood stick I have used my whole life, their responsiveness was anything but and the smooth composite finish was slippery to the touch.
That last point is an easy fix, of course. A little tape where the shaft and paddle meet will provide a tacky finish and even today nearly every model has some sort of grip applied to that area. Yet, the difference in feel between a wood and composite stick can be difficult to get past.
Keep in mind that I prefer to keep the shaft of my stick devoid of tape so that my hands can move up and down freely with just a good, solid knob at the very end to provide control with poke checks and puck handling. Many other goalies – like Ryan Miller – prefer some sort of homemade grip area where the shaft and paddle meet and the built-in grip that many composites have can eliminate the need to waste any more tape.
Another thing that helps with is vibrations caused by stopping pucks. Wood sticks, for the most part, pretty much absorb all vibrations caused by shots. But composites can suffer from something similar to a baseball bat with vibrations from a shot running up through the stick and into your hands. However, that’s something that is becoming less of an issue.
Advances in stick technology has provided a significant edge in many of the shortcomings composite sticks suffered from in the past. Most composites have shed weight in recent years and even the lower price point models are significantly lighter than the war clubs that preceded them. Yet, unless you’re aiming for the stars and the pro models, the weight savings aren’t all that much more than you find with pro model wood sticks.
The one primary advantage that I’ve found composites have over wood sticks is in durability. While you can certainly get a bad twig that breaks after 20 minutes of ice time, nearly every composite model out there will offer a longer life than wood sticks. While composites can snap at any moment, the well built ones don’t slowly deteriorate like a wood stick.
Wood sticks absorb water and will soften over time. As the blade of a stick deadens with age, rebound control will change and your puck handling (specifically passing) will suffer. Since a composite won’t suffer that sort of deterioration, you can count on them to give you a longer effective life after purchase.
Any sort of debate of wood vs. composite ultimately comes down to personal preference. There are plenty of guys and girls out there who swear by their composite sticks and won’t ever go back to a wood model. But then there are people like myself who prefer the feel you get with a wood stick and won’t change their tune.
A few other things to consider when planning on purchasing a stick:
– In many case weight and balance are more important than the curve or paddle length. If you’re able to easily move with the stick in hand and make normal goaltender moves, then that’s the stick for you. Just because you see NHL goalies using 27” paddles or big curves, doesn’t mean that is the type of stick you should use.
– Don’t buy a stick that you’ll need to cut down. Ideally a goalie stick is going to be just right for you when you purchase it. It doesn’t need to come to your chin or neck like a forward stick. Goal sticks are built with a specific balance point that will be altered if a portion of the shaft is cut down. Find a stick that fits you right, not one that needs to be altered.
– Buy at least two sticks at a time. The worst thing you can do is use two different sticks with drastically different patterns. When you find a curve and paddle length that you play best with, don’t mess around too much with it. Buy a second stick as a backup or practice stick and move forward with a unified arsenal of goal sticks.
– Try to use the more beaten up of your two sticks as your practice or warm up stick. If you have two identical sticks and one is more beaten up than the other, use that well worn stick for practice and warm ups. That will increase the longevity of your game stick and allow you to perform at a higher level.