CCM takes scoring to a new level with RBZ Stage 2 stick

CCM takes scoring to a new level with RBZ Stage 2 stick

CCM takes scoring to a new level with RBZ Stage 2 stick

Balance and power is the name of the game for the RBZ Stage 2 stick. After the wild success of the hot faced RBZ stick that rolled out last year, the great minds at CCM have found a way to take another step forward.

The RBZ Stage 2, due out in July, has taken CCM’s innovative stick and added even more pop. When I first picked up and used the original RBZ I noticed two things about it. First, the pop off the blade was noticeable. Second, the balance of the stick felt odd.

When you pull and RBZ off the rack at Great Skate you’ll notice that it is incredibly light but that it feels a little blade heavy. This was likely a product of the placement of the balance point that worked with the PowerSwing Technology that CCM and TaylorMade touted with the original stick. PowerSwing is straight from the golf club technology but it didn’t fully translate on the original. It does now, however.

The Stage 2 has an improved balance point to further exploit the Powerswing traits while also increasing the feel and balance of the stick exponentially. The Stage 2 is expected to have a much lighter feel in the blade.

In addition, the Stage 2 has a new blade construction. While CCM determined that the Speedblade was a great addition (it truly is), they wanted to improve upon it. What they did was take the original blade with four speed channels and adjust it to three larger speed channels. Not only does this alter the interior structure of the blade by decreasing weight, it increases the pop that the pucks comes off the stick with.

What they effectively did was make a light stick with a hot blade lighter and hotter. Based on the on-ice results, they hit a home run. The RBZ Stage 2 hits the shelves on July 19, make sure you’re first in line to Strap a Rocket to the Puck.

CCM/Reebok Demo Day: Testing the RBZ Skate and Stick

Demo Day for the CCM RBZ Skate and RBZ Stage 2 Stick

Demo Day for the CCM RBZ Skate and RBZ Stage 2 Stick

The day is nearing in which the hockey world will be graced with the RBZ Stage 2 stick and the new RBZ skates. As the company prepares to launch the next step in a line that has boomed with popularity, Great Skate had a chance to take an inside look at both the RBZ Stage 2 stick and RBZ skate.

A small group of guys got the full treatment from our CCM reps as they had a full lineup of the RBZ skate to choose from and about two-dozen RBZ Stage 2 sticks to choose from. The skate was quite informal, just shooting and passing in warm up suits and eventually things morphed into a center ice three-on-three scrimmage. What I did notice from spinning around the ice is that the RBZ skate is the real deal.

We got a brief rundown of some of the changes and improvements to the RBZ skate as compared to the U+ line that came before it. The RBZ has a full composite boot and is built with a little more pitch for a better angle of attack and increased agility. The skate is also built 4mm higher than previous skates. This factors with the aggressive pitch to give the skater a better radius for tighter turns and cuts.

The composite boot allows for a lighter build that increases your power on the ice. They also run a little larger than you might expect. I’m a size 12 shoe and typically wear a 10 or 10.5 in a skate. The pair of RBZs that I had on yesterday were 9.5 and fit quite well. As a side note, the skates I had were EE width which gave them a little play in the ankle and arch but it wasn’t too noticeable on the ice. There’s no doubt that a slightly more narrow boot would give a more snug fit.

On the ice the skate is light and responsive. I found myself making effortless cuts and I felt that my stride was powerful. I took a few hard laps and in-zone skates during the ice time to see how the skate felt in more of an in-game setting and they were great. Bear in mind that these were basically out of the box and right onto the ice. The wider boot may have factored into this, but I didn’t feel any ill effects from wearing a brand new skate without any sort of break in period.

As for the sticks, I have to say the Stage 2 stole the show. I’ve used an RBZ and I loved the pop that you get off the blade. The Speed Channels aren’t a gimmick and the hot blade they’ve created is something you feel on the ice. The original RBZ did have one drawback and that was the balance. It was a blade heavy stick and there was a strange sensation when using it because of the center of gravity.

With the Stage 2 this isn’t an issue. In addition to a new graphic scheme, CCM worked out the weighting issues so that this already incredibly light stick has the balance and feel you would expect.

I was fairly accurate – or as accurate as I could be – when shooting and the upgraded speed channels gave my slap shot a noticeable pop. When you consider the few shortcomings the original RBZ and factor in the changes made for the Stage 2, the word upgrade almost doesn’t do it justice.

Keep your eyes peeled for the new RBZ skate, Stage 2 stick and the Reebok Ribcor to hit the shelves at Great Skate later this summer. You won’t want to miss out on picking up these new models.

What they’re wearing: Mikhail Grigorenko

What they’re wearing: Mikhail Grigorenko

What they’re wearing: Mikhail Grigorenko

What they’re wearing will be a new feature for the Great Skate Blog which will focus in on the gear being worn by players from around the NHL. These posts will focus on both skaters and goaltenders so both groups of players are well represented. Hopefully this series not only gives you a better idea of what your favorite players are wearing, but clue you in to which gear you may be looking to pick up the next time you’re at Great Skate.

My first target for WTW is Mikhail Grigorenko, the top prospect in the Sabres system. He was up and down with the big blub this year but managed to wear quite a bit of gear during his time. This breakdown is based on his final game of the year against the Islanders, but I will reference a few other games too.

Skates: Bauer Supreme TotalOne

One of the few pieces of gear he didn’t change at any point during his time with the Sabres. A solid skate with a tough, rigid construction, the TotalOne is immensely popular at the NHL level and there are a number of models in the Supreme line available at Great Skate.

Gloves: Bauer 4-Roll

Grigorenko was quite loyal to the Bauer Supreme TotalOne glove for most of the season but was sporting the 4-Roll for the season finale on April 26 (see entry image). Both gloves are great choices. The 4-roll is a classic fit that is more or less the go-to for most professionals. It is a clean, traditional look with a clean, traditional fit. The Supreme is design for maximum ergonomic feel and responsiveness and moves beautifully with your hand when playing. For a gifted playmaker like Grigorenko, the TotalOne makes a whole lot of sense. Of course, you can never go wrong with the 4-roll.

Helmet: CCM Vector 08 with Oakley Pro Straight visor

Grigroenko sports the wildly popular CCM Vector shell with a Oakley Pro Straight visor. The Pro Straight is used by just about every NHLer who wears a visor and provides excellent clarity to the wearer. Grigorenko uses the 08 Vector with a more traditional foam liner rather than the EPP foam with the heat molded pad liner that is found on the Vector 10 model. Either way, it is a good looking helmet and one that I’ve been seriously contemplating for a purchase for some time.

Stick: Warrior Covert DT1 (white)

This is the reason I wanted to choose Grigorenko for this first installment. He has used a number of sticks throughout the season. While I can’t be sure, he may have been trying out an RBZ at one point as well. However, there is proof of him using the Covert throughout the year and in the final game. What is very interesting is that he’s switched sticks in the middle of games at times. Against the Rangers he went from the Covert to an APX and it wasn’t the first time I picked up on it. He also used a TotalOne early in the year.

While I’m fascinated by his choice to just rotate sticks whenever he wanted (he is a pro after all) I think the all-white Covert looks awesome. The Dagger Taper on the Covert is an awesome feature and I’m a sucker for all-white sticks. Great choice if you ask me.

Feel free to leave your recommendation for the next edition of WTW in the comments.

2013 NHL Playoff Preview

2013 NHL Playoff Preview

GreatSkate.com 2013 NHL Playoff Preview Today marks the opening day of the 2013 Stanley Cup playoffs. This begins a month-long saga that will

Today marks the opening day of the 2013 Stanley Cup playoffs. This begins a month-long saga that will lead to one team hoisting the Stanley Cup. While most expect the Blackhawks and Penguins to cruise through to the Cup Finals, don’t count any team out. This is the best tournament in all of sports and the uncertainty surrounding the outcome of each period, game and series makes it such.

Eastern Conference

Pittsburgh vs. New York Islanders

Pittsburgh is on the top of the heap of everyone’s favorite to advance to the Cup Finals. Looking at their roster as it compares to the Islanders (specifically in this series) you can see why so many are expecting them to advance. Last year, on my personal Sabres blog (twointhebox.com), I expected the Islanders to
make the playoffs. I was one year off but I think this is an organization on the rise. However, I don’t think they’re deep enough to run with the Penguins. Simply put, the Penguins have too many horses. Pens in 5

Montreal Canadiens vs. Ottawa Senators

A very interesting matchup and the first of two Northeast Division showdowns. Ottawa has begun to tail off lately as I believe their injuries are beginning to catch up. This could be a very interesting series to track but I wonder if the Senators youth could bite them here. This will certainly be a battle and I do believe that Montreal will be in for a dogfight. Montreal in 6

Washington Capitals vs. New York Rangers

A week ago the Rangers were staring a first round series with the Penguins square in the face. Fast forward to the start of the first round and they’re looking at the Southeast Division winner, a much more comfortable matchup. The Caps are talented but I feel that the Rangers have built the momentum they’ve been searching for and will roll through the first round series. Don’t count out Ovie & Co. but I don’t see them advancing. Rangers in 6

Boston Bruins vs. Toronto Maple Leafs

Toronto has started to skid and skid hard. I don’t think they’re as talented as their finish showed and I don’t think they will fare well in a seven-game series with the Bruins. Boston’s struggles shouldn’t be ignored but I think they will have at least one more round to work them out. Bruins in 4

Eastern Conference Champion: Montreal over Pittsburgh in seven games.

Western Conference

Chicago Blackhawks vs. Minnesota Wild

Minnesota made the postseason by the skin of their teeth and are rewarded with the league’s best team. While the Blackhawks goaltending is the only looming question mark, I don’t think the Wild will have the depth to truly test the Blackhawks. Blackhawks in 5

Anaheim Ducks vs. Detroit Red Wings

All playoff series rely on goaltending, so it is hard to say that one will need better goaltending than another. However, if Anaheim’s tandem is off they are a very average team in net. If Hiller or Fasth are on top of their game, then it is an entirely different story. This will be a very interesting series to track. Wings in 7

Vancouver Canucks vs. San Jose Sharks

It seems like these two teams are perennially meeting in the postseason. Fans in San Jose keep waiting for this franchise to take the next step but opening with the Canucks probably isn’t the way to do it. The Canucks are deep and talented. I think the Sharks are preparing to retool in some areas of their roster and may make a quick exit. Canucks in 5

Los Angeles Kings vs. St. Louis Blues

The Kings swept the Blues last year when Brian Elliott fell apart in the second round. I like the Blues – and as a Sabres fan I’d like the pick in the Leopold trade to be a fourth – but I wonder if they can hold up this year now that they’ve shored up their depth in many areas. At the end of the day this is the defending champs and I think that gets the job done in this room. Kings in 7

Western Conference Champion: Vancouver over Chicago in seven games

Stanley Cup Champion: Vancouver over Montreal in six games

In the Crease: Maintaining your gear

Perhaps no one position relies more on their equipment than goaltenders. From your skates to your helmet, every piece of gear can be used to make a save and is therefore vital in each and every game. Making sure your equipment is maintained is an important part of playing between the pipes.

While goaltending equipment is anything but fragile, it is important to ensure it is maintained properly. Ensuring to properly dry and store your equipment is an obvious rule of thumb but there are some other actions you can take to ensure your gear will help you perform at an elite level.

- Maintain the shape of your glove’s pocket

Each model of catching gloves have different features and construction methods for the pocket. Some have a hockey lace pocket, some use basic twine. Some have a split-T, some a reinforced-T and others a simple single-T. However, it is vital to make sure your pocket maintains proper integrity at all times.

A simple way to do this is to pop a softball in your glove when you’re storing it. This may not work for those of you who dry their gloves in the open position. But whenever you have the opportunity, toss a regular softball in the pocket.

The size of the softball will keep the T fully shaped and also keep the twine or lace pulled out with the T. This will ensure that the pocket will not collapse or lose its original structure. While it may not seem like much, it will help with popouts when making saves with your glove and sealing on the ice when covering the puck.

- Save your laces

All goal pads come with very generic twine to tie your skates into the pad at the toe bridge. This twine isn’t the best option for you to use when tying your pads into your skates. One of the first things I do when I get a new set of pads (which isn’t often enough) is to pull out the stock twine that the pad is manufactured with and replace it with skate lace.

Skate lace is far more durable than the stock twine and can also be adjusted to any length that you’re comfortable with. Using skate lace will give you a long-lasting product on a portion of your pad that is under constant stress and wear. Skate last will last far longer than the life expectancy of the stock twine.

The skate lace will also allow you to cut it to the exact length you prefer when tying in your pads will all but eliminate the lace from either coming untied or hanging down around the ice during games or practices. Stepping on a loose piece of twine is a terrifying feeling and putting your own skate lace in will make you feel very secure.

Another helpful hint with the lace: don’t buy a brand new set of laces for this. Collect old or ripped laces from around the locker room (or if you replace your laces). You don’t need a full 96” lace for your pads and even an old, ripped lace will be cut and adjusted anyway.

- Make those laces last

Most goal skates have a full plastic cowling these days. The plastic is rounded and smooth which makes the area between the blade and cowling an area far less susceptible to wear. However, older skates and some lower price point models still have exposed steel. Whether you have a full-plastic cowling or exposed steel, it is wise to wrap tape around those areas your pad lacing and straps will rub against. The tape will limit wear and add life to those parts of the pad. Once again, another nice way to prevent the laces that you use to tie into your pads from ending up on the ice.

- Dry your pads upside down

This is only a recommendation you should follow if you really like having a significant s-curve in your pads. If you prefer or use a stiffer pad, don’t try this. By storing your pads upside down, the wettest portion (the bottom) will help to add pressure on the rest of the pad while drying, thus slowly creating a more pronounced s-curve. I used this on my old Vaughn Velocity models and it led to great closure along the ice and at the five hole when I was in the butterfly. I have since stopped since going to a longer pad that has a different construction.

The main drawback is that this will shorten your pads over their lifetime. So if you don’t have a tall enough pad, or don’t want to lose that vertical length, don’t give this a try. However, the s-curve it creates will help when the pads are on the ice.

If I were to go back to a leg pad with a softer construction (Velocity or even Bauer’s new Reactor) I’d consider flipping my pads once again. This is definitely not for everyone, but I loved the way my pads performed when I tried it.

- Treat your gear as well as you want to play

This is more about the mindset associated with playing the game more than anything else. As the saying goes, “look good, play good” (sic). If you’re happy with how your gear feels and performs, you’re likely to respond in a similar manner. If your equipment is soggy, feels awful and is breaking down, you probably won’t play very well.

Make sure you fully air out your equipment, take sweatbands out of your helmet or other removable areas on your gear. You should want your gear to last as long as possible and perform at the maximum level. Hopefully these tips will steer you in the right direction.

CCM RBZ skates coming this July

CCM RBZ skates coming this July

Florida’s Jonathon Huberdeau using CCM’s new RBZ stick and skates this season

CCM’s next great introduction into the line of skates is coming in July 2013. After strapping a rocket to the puck with the RBZ stick, CCM looks to strap rockets on your feet when they introduce the RBZ skate this summer.

The RBZ has a number of new features and advancements designed to set it apart from other skates on the market now and those that will be coming into this summer and into the winter. CCM has introduced a brand new holder for the RBZ line. The SpeedBlade 4.0 holder is the highest holder in hockey, providing an unparalleled angle of attack. The higher holder is designed to increase turning radius by 10% and the entire construction of the holder – including a design feature called Speed Ribs – offers a stronger and more stable set up.

Specifically, the SpeedBlade 4.0 is designed to limit rotational torsion along with increasing vertical and horizontal rigidity throughout the holder. CCM also has rolled out a new steel runner (blade) for the skate. The polished steel SB Hyperglide runner is designed to increase glide and edge work while limiting friction. The SpeedBlade is featured on three different RBZ models (Pro, 100, 90 and 80) but the SB Hyperglide can only be found on the RBZ pro skate.

The RBZ’s boot is really what stands out to me. While I appreciate the increased attack angle that many new skates are rolling out, the boot is always the x-factor for me. Since that is where your foot will spend each ice time, it’s important to me to have a boot that will offer supreme comfort and protection.

The boot itself is a composite construction that implements Speedcore technology. This is a design feature that maximizes stiffness to increase how the skate reacts with your foot. As a big fan of CCM’s skates, I can attest that stiffness shouldn’t be confused as a sacrifice to comfort. Think of it as trying to play football with your shoes untied as compared to lacing them up tight. The Speedcore carbon composite design allows the quarter package of the skate to remain stiff and responsive during play.

Perhaps the most groundbreaking feature of the skates is CCM’s new Custom Support Insoles. This is a brand new feature that offers three levels for a player to choose from. CCM and currexSole teamed up to create a hockey-specific footbed system that will work with high, medium and low-arch feet. By determining which level or arch support you need, the insole you choose will improve contact between the sole of your foot and the skate, thus allowing for greater reaction and responsiveness when skating.

Much like the custom insoles offered at Great Skate, the CCM Custom Support Insole feature is built to react to your specific anatomical needs as opposed to the thin, unsupportive insoles typically provided in hockey skates.

An added bonus with these skates is the pro felt tongue with lace bite protection. It isn’t long enough to fold over for a proper “sniper tongue”, but it will offer the comfort and protection of a traditional felt tongue.

As someone who is in the market for a new pair of skates, the RBZ is a model that is worth waiting for. Come July I may just be strapping a rocket to my feet.

CCM helmets boom in popularity

CCM Hockey Helmets

This shot of the Maple Leafs’ bench shows all but three players wearing a CCM model helmet

Laying claim to the most popular piece of equipment in the NHL is no easy feat. With players using custom models – and even some prototypes – determining the most widely used piece of equipment might not be the easiest task.

However, just look up and down any NHL bench and you’ll see one obvious trend; more players in the world’s best league are using CCM helmets. In fact, I reached out to CCM on Twitter and found out the V08 model is the one that has become the most popular helmet in the NHL

The CCM shell design meets all the requirements that players look for. It has a narrow, low-profile look with plenty of ventilation and an overall design that passes the ever important mirror test. All of CCM’s helmets have a similar shell design, but only the VECT and V08 models use the same ventilation layout and on-the-fly adjustment tabs.

In fact, CCM’s helmets sport 19 total vents in various areas of the helmets to ensure maximum airflow for the wearer. The vent layout on the front of the helmet has a somewhat futuristic look to it that adds some attitude to the look of the shell.

What might be interesting to hear is the fact that the V08 has more popularity amongst professionals than the VECT model. However, the liner foam in the V08 is made up of dual-density VN foam that has long been wildly popular at the pro ranks. This type of liner is used by all manufacturers and although it doesn’t have the bells and whistles of the liners used in each company’s top helmet model, it is extremely comfortable despite some of the technical shortcomings

CCM’s VECT model uses EPP foam with memory foam padding at strategic points in the liner. This combination provides excellent protection and actually offers some improvements over the traditional VN foam liner in the V08 model (CCM’s V06 model also uses the EPP and memory foam combo). When it comes down to choosing one model over the other the determination comes down to comfort.

What shouldn’t be ignored are the safety and comfort of the EPP and memory foam found on the VECT model. As someone who has used helmets that utilize both a traditional VN foam liner and the more advanced EPP with memory foam pads, I’m not sure if there is a clear favorite.

Amongst the numerous helmets I’ve donned are a Bauer 4500 and 5100 (current) along with a RBK 8K which, at the time, was their top model.

The 8K had the EPP and memory foam combo and was extremely comfortable to wear. The specific design of that helmet allowed for a lot of airflow and the memory foam pads were strategically positioned for maximum comfort. Much like my old 8K, I’m certain that the VECT liner construction will offer the same comfort if you should choose to make it your next purchase.

The main issue many have is that the EPP and memory foam combination doesn’t always feel as comfortable for all wearers. That is the beauty of the VN foam liner. It is a generic liner that cushions your head no matter what comfort level you’re seeking. While the foam doesn’t have the same properties as memory foam, the sweat and heat produced during play will help to break in the foam and it will end up molding to your head over time.

I’d have to say that if tasked with choosing a new helmet that a model with VN foam would be what I’d purchase. However, that shouldn’t direct you or anyone else from the protective qualities that a model, like the VECT, with EPP foam has. Ultimately it is all about finding the delicate balance between comfort and

Composite Mini Sticks

Bauer Vapor APX Mini Stick

Manufacturers bring top-end sticks to childhood favorite

 

Manufacturers bring top-end sticks to childhood favorite

Knee hockey is one of the numerous things that makes hockey what it is. Not many sports have a portable, miniature version that can be played just about anywhere.

Just think back to travel tournaments and the countless hotel hallways you were expelled from when playing knee hockey. Knee hockey just happens to be a portion of hockey culture that makes our sport so incredibly unique.

Not unlike the full size version of the sport, knee hockey has seen a number of advances in recent years. Manufacturers now make miniature nets (not necessarily a new development) which inevitably saves desks, tables, chairs and hallway radiators from the beating that comes along with the game. In addition, the days of dipping your straight-blade plastic stick in boiling water to create a curve are over. Now you can choose a mini stick from a plethora of choices that are near mirror images to the full size sticks made by hockey’s biggest manufacturers.

Warrior, Bauer, CCM, Reebok and Sher-Wood all have created their own composite mini sticks complete with curves and identical design patterns to that of the full size retail sticks you use on the ice. What these sticks do is add a little style and extra performance to a rec-room or travel tournament classic.

Reebok not only has a mini composite version of their new 20K stick, they also introduced a composite goal stick that is patterned after the 11K composite goal stick that is being used throughout the NHL – this follows previous miniature versions of the O-Stick and A.I.9. CCM also produced a mini composite of their premier stick with a mini RBZ. Like the 20K, the mini RBZ also sports the same markings and art that the top model does – although it doesn’t provide some of the technological advances that the full size stick does.

Both CCM and Reebok have their own net models as well which can be set up in your basement or rec room to add even more of an ice element to each knee game.

Bauer actually has a Vapor APX and TotalOne NXG for you to choose from while Sher-Wood’s collection spans the entire NHL. So, for those of you who are nostalgic for the straight plastic, team-branded sticks of the past, perhaps the Sher-Wood team models would provide a nice transition.

While I can’t attest if the composite mini sticks can add performance to your knee hockey game as their full-size cousins do for ice hockey, I can say they bring a cool wrinkle to a game that you should never need an excuse to play.

I, for one, am seriously considering setting up a knee hockey rink as part of my man cave in the very near future.

Strap a Rocket to the Puck – CCM RBZ Composite stick

CCM RBZ Senior Grip Composite Hockey Stick - 85 Flex

CCM RBZ Senior Grip Composite Hockey Stick – 85 Flex

CCM’s new partnership with golf giant TaylorMade is paying immediate dividends for scorers who are snatching up the new one-piece composite from CCM.

A host of new features and innovations to the stick has made the RBZ a hot item this season as the stick has quickly become a favorite of players everywhere. CCM’s new venture with TaylorMade includes the introduction of Power Swing, Custom Kick Point and Speedblade technology in their new stick.

Designed to compete with the top-end models from companies like Easton (Stealth RS) and Bauer (Vapor APX), the RBZ’s lightweight build keeps it in line with other ultra-light options that have been on the market this year. By comparison, the RBZ weighs in at about 447 grams to the 442 of the featherweight Stealth RS.

The weight and balance of the stick are quite impressive. The center of gravity combined with the lightweight construction contribute to the Power Swing technology with the RBZ.

In addition to the lightweight construction and sleek white matte finish – the sitck camouflages nicely with the boards and ice – the technological features are not just flashy names attached to the same old stick technology.

The Custom Kick Point is a truly innovative feature as the stick has been built with a true flex construction. Rather than having a single kick point at a specific section of the stick, the RBZ’s shaft is consistently stiff at any point. This means that the stick’s flex and kick point will adjust to where you place your hands as a player; guaranteeing a true flex whether you’re looking for a quick release wrist shot or bearing down on a slap shot. Unlike any stick that has come before it, the RBZ adapts to the style you play with thanks to the Custom Kick Point.

The Speedblade technology is perhaps the one piece of technology that most closely parallels what is found in the wildly successful Rocketballz line of drivers and fairway woods manufactured by TaylorMade. Rather than using a traditional foam core construction, TaylorMade pulled directly from their line of drivers to take advantage of C.O.R., or the trampoline effect.

Rather than filling the shaft with foam, which absorbs energy from the puck and thus reduces velocity, the RBZ eliminates foam altogether. The RBZ’s Speedblade is actually constructed with four hollow speed channels that create a hot face for the stick’s blade. This design feature maintains the same durability of a typical composite stick while adding noticeably more control and pop to each shot.

While the RBZ is a fairly new product, those that have had it on the ice have noticed an immediate benefit to their shots as the stick provides more pop thanks to the “hot face”. In addition, the Custom Kick Point allows any player to get the most out of the flex of their particular stick.

Great Skate has the RBZ in stock in a number of different blade patterns so get in now and strap your own rocket to the puck.

Finding Your Hockey Stick Flex

Wandering through Great Skate’s stick section provides players with a plethora of options from manufacturers like Bauer, CCM, Reebok, Warrior and many others. Picking the right stick for you is determined by many factors that ultimately will help find the right stick for your game.

The right look, feel, weight, curve and flex of a stick are all determining factors for a player making this choice. Determining the right curve and weight is often something that has developed over a number of years and that has been determined by the style of game you play. In many ways the flex of any stick you buy will be determined in the same manner. However, how do you know which flex suits you best?

There are a number of different flexes available for players to choose from the range upwards to 110 (very stiff) to 40 (junior flex). It is important that the flex used by a player meets their specific strength and skill level.

In the case of young players who are still perfecting stickhandling and shooting, ensuring that the flex of your stick is adequate for your physical strength is just about all that needs to be considered. For those players who are stronger and more developed, finding an adequate flex will be more important.

First off, understand that different stick manufacturers utilize different practices and construction methods. Just like Ford, Toyota and Chevy all make different four-door cars, Bauer, CCM and Warrior make different composite sticks. So you may find that the 100 flex on the new CCM RBZ will feel differently from the 100 flex on a Bauer Total One or the new Warrior Covert.

Another thing to keep in mind is that lengthening or cutting down a stick will affect the flex. Each time you cut down a stick, you add stiffness to the original flex. You can expect to increase a stick’s flex by about 10 if you take off 2-3 inches. The opposite is true if you add length to a stick as it will add whip.

When it comes down to choosing the right flex there are a number of determining factors that come into play. For players who aren’t fully developed, an intermediate flex – between 50 and 75 – is a good starting point while 90 or 100 is a good place to start for those players who are fully grown.

Going up or down in flex will be determined by a few different factors that include playing style, strength and how skilled you are. Bear in mind that a player who isn’t as skilled and is still working on developing different facets of their game will struggle with a stick with a stiff flex (anything above 100) as it will not only limit your ability taking slap shots but wrist shots too.

If you’re a player who has a heavy slap shot, a stiffer flex would be best for you. In addition, physically strong players will not only have an easier time flexing stiffer sticks, they will gain more benefit from using one. The inverse is also true. If you’re slap shot is lacking and you aren’t as physically strong as others, going with a lighter flex will allow you to fully utilize your specific skill set.

Conferring with a Great Skate sales associate will also provide expert guidance to your specific needs when shopping in the store or online.

At the end of the day, finding a proper flex is going to be based largely off personal preference. But if you find a certain area of your game lacking, consider going up or down in flex to see if there is a noticeable difference.

CCM RBZ Grip Senior Hockey Stick 100 Flex

CCM RBZ Grip Senior Hockey Stick 100 Flex

Warrior Covert DT1 Senior Composite Hockey Stick - 85 Flex

Warrior Covert DT1 Senior Composite Hockey Stick – 85 Flex

Bauer Supreme Senior TotalOne NXG Hockey Stick - 77 Flex

Bauer Supreme Senior TotalOne NXG Hockey Stick – 77 Flex